Showing posts with label Technical. Show all posts
Showing posts with label Technical. Show all posts

Tuesday, October 11, 2011

US Army, Technical Manual, TM 5-1730-245-24P, POWER SUPPLY, HYDRAULIC MODEL NUMBER 9305 (NSN 1750-01-342-2184) (EIC: YX6)

US Army, Technical Manual, TM 5-1730-245-24P, POWER SUPPLY, HYDRAULIC MODEL NUMBER 9305 (NSN 1750-01-342-2184) (EIC: YX6) Review



US Army, Technical Manual, TM 5-1730-245-24P, POWER SUPPLY, HYDRAULIC MODEL NUMBER 9305 (NSN 1750-01-342-2184) (EIC: YX6)


Saturday, October 8, 2011

TECHNICAL MANUAL NIGHT VISION GOGGLES (NVG), AN/PVS-7B, AN/PVS-7D, TM 09500A-10/1A

TECHNICAL MANUAL NIGHT VISION GOGGLES (NVG), AN/PVS-7B, AN/PVS-7D, TM 09500A-10/1A Review



Section I General Information Scope
1-2 Maintenance Forms and Procedures
1-3 Corrosion Prevention and Control (CPC)
1-4 Destruction of Electronic Materiel to Prevent Enemy Use
1-5 Reporting Equipment Improvement
Recommendations (EIR)
1-6 Warranty Information
1-7 Nomenclature Cross-Reference List
1-8 List of Abbreviations and Acronyms
1-9 Glossary
Section II Equipment Description
1-10 Equipment Characteristics, Capabilities and Features
1-11 Location and Description of Major Components
1-12 Difference Between Models
1-13 Equipment Data
Section III Principles of Operation
1-14 Mechanical Functions
1-15 Optical Functions
1-16 Electronic Circuit Function
CHAPTER 1 INTRODUCTION
Section I General Information
1-1 Scope
1-2 Maintenance Forms and Procedures
1-3 Corrosion Prevention and Control (CPC)
1-4 Destruction of Electronic Materiel to Prevent
Enemy Use
1-5 Reporting Equipment Improvement
Recommendations (EIR)
1-6 Warranty Information
1-7 Nomenclature Cross-Reference List
1-8 List of Abbreviations and Acronyms
1-9 Glossary
Section II Equipment Description
1-10 Equipment Characteristics, Capabilities and
Features
1-11 Location and Description of
Major Components
1-12 Difference Between Models
1-13 Equipment Data
Section III Principles of Operation
1-14 Mechanical Functions 1-15 Optical Functions
1-16 Electronic Circuit Function
CHAPTER 2
Section I Description and Use of Operator’s
Controls and Indicators
2-1 Operator Controls and Indicators
Section II Prevention Maintenance Checks
and Services (PMCS)
2-2 Preventive Maintenance Checks and
Services Table2-3 Resolution Check Using the
TS-4348/UV Test Set
2-4 Inspection Criteria for Proper Image
Intensifier Operation
Section III Assembly and Preparation for Use
2-5 Unpacking
2-6 Installation of Batteries
2-7 Installation of Eyecups
2-8 Installation of Demist Shields
2-9 Installation of Sacrificial Window
2-10 Installation of Compass
2-11 Installation of LIF
2-12 Installation of IR Spot/Flood Lens
2-13 Installation and Adjustment ofHeadmount
2-14 Installation of Headmount with Protective Mask
2-15 Installation of Headmount with Helmet
2-16 Installation of Original Helmet Mount to Helmet
2-17 Installation of New Helmet Mount
to Helmet
2-18 Installation of New Helmet Mount
with New Nape Strap to Helmet
2-19 Installation of the AN/PVS-7D Helmet Mount to Helmet
2-20 Installation of 3X Magnifier
Section IV Operating Procedures
2-21 Head Mounted Operations
2-22 Helmet Mounted Operations
2-23 Hand-Held Operation
2-24 Operation with Compass
2-25 IR Source Operations
2-26 Operation with 3X Magnifier
2-27 Preparation for Storage
Section V Operation Under Unusual Conditions
2-28 Operation in Dusty or Sandy Areas
2-29 Operation in Rainy or Humid Conditions
2-30 Operation in Salt Water Areas
2-31 Operation in NBC Environments
2-32 Operation in Laser Threat Environments
CHAPTER 3 MAINTENANCE INSTRUCTIONS
Section I Lubrication Instructions
Section II Troubleshooting Procedures
3-1 Troubleshooting
Section III Operator’s Maintenance Procedures
3-2 Cleaning the NVG
3-3 Headmount Maintenance
3-4 Neck Cord Maintenance
APPENDIX A References
APPENDIX B Components of End Item (COEI) and Basic Issue Items (BII) List
APPENDIX C Additional Authorization List (AAL)
APPENDIX D Expendable and Durable Items List


Thursday, September 15, 2011

U.S. Army Technical Manual, TEST SET, STABILIZATION SYSTEM, P/N 70700-20650-050, TM 1-6625-735-14, 2001

U.S. Army Technical Manual, TEST SET, STABILIZATION SYSTEM, P/N 70700-20650-050, TM 1-6625-735-14, 2001 Review



U.S. Army Technical Manual, TEST SET, STABILIZATION SYSTEM, P/N 70700−20650−050, TM 1−6625−735−14, 2001


SCOPE.
This manual describes the TEST SET, STABILIZATION
SYSTEM 70700-20650-050 and provides
instructions for replacement of parts available to
operators, aviation unit, and intermediate maintenance
technicians.


Monday, September 12, 2011

U.S. Army Technical Manual, TM 3-4240-201-20P, TFILTER UNIT, GAS PARTICULATE, M7A1, (FSN 4240-203-3999), 1970

U.S. Army Technical Manual, TM 3-4240-201-20P, TFILTER UNIT, GAS PARTICULATE, M7A1, (FSN 4240-203-3999), 1970 Review



U.S. Army Technical Manual, TM 3-4240-201-20P, TFILTER UNIT, GAS PARTICULATE, M7A1, (FSN 4240-203-3999), 1970


Scope
This manual lists repair parts required for the
performance of organizational maintenance of the M7A 1
Filter Unit.


Friday, September 9, 2011

US Army Technical Manual, SHOP SET, TURBINE ENGINE, AIRMOBILE, TM 1-4920-454-13&P, 1991

US Army Technical Manual, SHOP SET, TURBINE ENGINE, AIRMOBILE, TM 1-4920-454-13&P, 1991 Review



US Army Technical Manual, SHOP SET, TURBINE ENGINE, AIRMOBILE, TM 1-4920-454-13&P, 1991


scope.
Type of Manual: Operator and Intermediate Maintenance
Equipment Name: Turbine Engine Shop
Purpose of Equipment: To provide turbine engine repair and maintenance support for divisional aviation units. This shop
. is utilized in conjunction with other maintenance shops in the AVIM support unit.


Monday, September 5, 2011

U.S. Army Technical Manual, TM 3-6665-209-35, INDICATOR, OUTLET VALVE LEAKAGE, M4A1, 1964

U.S. Army Technical Manual, TM 3-6665-209-35, INDICATOR, OUTLET VALVE LEAKAGE, M4A1, 1964 Review



U.S. Army Technical Manual, TM 3-6665-209-35, INDICATOR, OUTLET VALVE LEAKAGE, M4A1, 1964

Scope
This manual is published for the use of personnel
responsible for third, fourth, and fifth echelon
maintenance of the M4A1 outlet valve leakage indicator
(fig. 1). It contains information on the repair and
replacement of major units of the indicator. Hereinafter
this equipment will be referred to as an indicator.


Monday, August 29, 2011

US Army, Technical Manual, TM 9-1315-249-12&P, 81MM MORTAR TRAINING DEVICE: 81MM SABOT (INERT) M1, AND 22MM SUB-CALIBER PRACTICE CARTRIDGE M744, M745, M746, AND M747, 1990

US Army, Technical Manual, TM 9-1315-249-12&P, 81MM MORTAR TRAINING DEVICE: 81MM SABOT (INERT) M1, AND 22MM SUB-CALIBER PRACTICE CARTRIDGE M744, M745, M746, AND M747, 1990 Review



US Army, Technical Manual, TM 9-1315-249-12&P, 81MM MORTAR TRAINING DEVICE: 81MM SABOT (INERT) M1, AND 22MM SUB-CALIBER PRACTICE CARTRIDGE M744, M745, M746, AND M747, 1990


Scope
This publication provides operator and unit personnel with instructions for maintenance and use of the training device for 81mm Mortars (all models); 81mm Sabot (INERT), M1; and 22mm sub-caliber practice cartridge, M744, M745, M746 and M747.


CHAPTER 1. INTRODUCTION
Section I. General
Scope
II. Description and Data
Description
Data
III. Functioning
Sabot loaded with practice round
22mm practice cartridge
CHAPTER 2. OPERATING INSTRUCTIONS
Section I. Safety Precautions
General
Safety area
Firing safety
Duds
II. Operating Procedures
Preparation for firing
Firing
During firing
Cancellation of firing
Operation under extreme weather conditions
CHAPTER 3. OPERATOR MAINTENANCE
Prior to firing
During firing
After firing
CHAPTER 4. UNIT MAINTENANCE
General
Sabot
22mm sub-caliber practice cartridge
APPENDIX A. REFERENCES
B. MAINTENANCE ALLOCATION CHART
C. BASIC ISSUE ITEMS LIST (not applicable)
D. REPAIR PARTS AND SPECIAL TOOLS LIST
E. CONSUMABLE MAINTENANCE SUPPLIES AND MATERIALS


LIST OF ILLUSTRATIONS
Figure Title Page
1-1 81mm Sabot, M1
1-2 22mm practice cartridge, M744, M745, M746, M747
1-3 81mm Sabot cross section showing 22mm cartridge in loaded position
1-4 81mm Sabot, Ml-flange nut assembly
1-5 Sabot packing box
1-6 22mm cartridge cross section
1-7 Cartridge packing box
1-8 Firing of mortar training device and cartridge
1-9 Cartridge cross section
1-10 Diagram of Sabot and 22mm cartridge, firing to impact
1-11 Optical and acoustical observation of target strikes
2-1 Recommended safety zone
2-2 Misfire removal procedure
2-3 Removal of flange nut
2-4 Insertion of cartridge
2-5 Removal of safety cap
2-6 Replacement of flange nut
2-7 Removal of fired cartridge
2-8 Firing table for 81mm Sabot, M1, using 22mm practice cartridge
3-1 Cleaning staff assembly, cleaning wick and brushes


Sunday, August 21, 2011

US Army Technical Manual, INSTALLATION AND TESTING PRACTICES, AIRCRAFT FIBER OPTIC CABLING, TM 1-1500-323-24-4, 2004

US Army Technical Manual, INSTALLATION AND TESTING PRACTICES, AIRCRAFT FIBER OPTIC CABLING, TM 1-1500-323-24-4, 2004 Review



US Army Technical Manual, INSTALLATION AND TESTING PRACTICES, AIRCRAFT FIBER OPTIC CABLING, TM 1-1500-323-24-4, 2004


PURPOSE AND SCOPE.
2. This manual was prepared for the following
reasons:
a. To gather under one cover the recommended
techniques, procedures and methods to be used for
general practices (including cleaning and laser safety),
and for operations such as fabrication (including
termination, assembly, and maintenance/repair),
installation and testing (including troubleshooting) of
fiber optic cable topologies (optical fiber interconnection
systems with the cabling associated components) on
military aircraft. The methods specified herein are not
identifiable to any specific aircraft class (such as high
performance) or type (such as rotary or fixed wing), but
are intended to standardize and minimize variations in
processes, techniques, procedures and methods to
enhance the compatibility of these fiber optic operations
on all military aircraft. The topology includes fiber
optic links, cable assemblies and cable harnesses
although only one topology may be cited at times.

b. To standardize these techniques and methods
so that fiber optic installation, test and maintenance

c. To indoctrinate all personnel with the importance
of good workmanship.

d. To point out the failures which may result from
poor workmanship.

e. To promote safety by pointing out and
prohibiting unsafe practices.

3. This manual covers general-purpose fabrication,
installation, troubleshooting/test and maintenance/
repair of aircraft fiber optic cable topology used for the
interconnection of equipment in aircraft.
will be done in a uniform manner.


Saturday, July 30, 2011

US Army Technical Manual, TM 91005-211-12P, PISTOL, CALIBER .45, AUTOMATIC, M1911A1, (NATIONAL MATCH) WITH ADJUSTABLE REAR SIGHT, 1968

US Army Technical Manual, TM 91005-211-12P, PISTOL, CALIBER .45, AUTOMATIC, M1911A1, (NATIONAL MATCH) WITH ADJUSTABLE REAR SIGHT, 1968 Review



US Army Technical Manual, TM 91005-211-12P, PISTOL, CALIBER .45, AUTOMATIC, M1911A1, (NATIONAL MATCH) WITH ADJUSTABLE REAR SIGHT, 1968

Scope
This manual lists basic issue items, repair parts,
special tools and equipment required for the
performance of organizational maintenance of the
Mi911Al Pistol (National Match).

SECTION I. INTRODUCTION
II. BASIC ISSUE ITEMS LIST
III. MAINTENANCE AND OPERATING SUPPLIES
IV. REPAIR PARTS
Repair Parts For:
Major groups and assemblies
Slide Group
Receiver Group
V. SPECIAL TOOLS AND EQUIPMENT
VI. INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER
CROSS-REFERENCE TO FIGURE AND ITEM NUMBER


Tuesday, July 26, 2011

US Army, Technical Manual, TM 55-1905-223-24-10, LANDING CRAF UTILITY, (LCU), (NSN 1905-01-154-1191), 1989

US Army, Technical Manual, TM 55-1905-223-24-10, LANDING CRAF UTILITY, (LCU), (NSN 1905-01-154-1191), 1989 Review



US Army, Technical Manual, TM 55-1905-223-24-10, LANDING CRAF UTILITY, (LCU), (NSN 1905-01-154-1191), 1989

Scope. The scope of this manual is as follows:
a. Type of Manual. Unit, intermediate direct support, and intermediate general support maintenance manual.

b. Name of Equipment. The equipment covered by the manual is the bow ramp winch assembly that is installed aboard the LCU 2000 Class Watercraft. The system is made up of the following components

(1) Hydraulic Winch Assembly
(2) Hydraulic Power Pack Assembly

c. Purpose of Equipment. The bow ramp winch assembly is used to lower and raise the bow ramp.


Monday, July 18, 2011

U.S. Army Technical Manual, TM 3-4940-200-15, MECHANISM, VALVE REPLACEMENT, M1, 1964

U.S. Army Technical Manual, TM 3-4940-200-15, MECHANISM, VALVE REPLACEMENT, M1, 1964 Review



U.S. Army Technical Manual, TM 3-4940-200-15, MECHANISM, VALVE REPLACEMENT, M1, 1964


Scope
This manual is published for the use of personnel
responsible for operator's, organizational, direct support,
general support, and depot maintenance of the M1
valve replacement mechanism. It contains information
on the repair, replacement, and overhaul of major units
as well as detailed lubrication, cleaning, and painting
information applicable to each level of maintenance, as
authorized in the maintenance allocation chart.


Sunday, July 17, 2011

US Army, Technical Manual, TM 55-6670-201-13&P, AIRCRAFT WEIG KIT, TYPE A/S 37M-1, (NSN 6670-00-148-9395),

US Army, Technical Manual, TM 55-6670-201-13&P, AIRCRAFT WEIG KIT, TYPE A/S 37M-1, (NSN 6670-00-148-9395), Review



US Army, Technical Manual, TM 55-6670-201-13&P, AIRCRAFT WEIG KIT, TYPE A/S 37M-1, (NSN 6670-00-148-9395),


Wednesday, July 13, 2011

US Army, Technical Manual, TM 5-3610-245-13, CUTTER, PAPER GUILLOTINE (CHALLENGE MACHINERY MODEL 305HB)

US Army, Technical Manual, TM 5-3610-245-13, CUTTER, PAPER GUILLOTINE (CHALLENGE MACHINERY MODEL 305HB) Review



US Army, Technical Manual, TM 5-3610-245-13, CUTTER, PAPER GUILLOTINE (CHALLENGE MACHINERY MODEL 305HB) (FSN 3610-689-5705


Sunday, July 10, 2011

US Army, Technical Manual, TM 55-1945-205-24-1-4, MODULAR CAUSEWAY SYSTEM, (MCS), CAUSEWAY FERRY, (CF), TRANSER CASE 738AN4NL4F, (NSN PENDING), 2003

US Army, Technical Manual, TM 55-1945-205-24-1-4, MODULAR CAUSEWAY SYSTEM, (MCS), CAUSEWAY FERRY, (CF), TRANSER CASE 738AN4NL4F, (NSN PENDING), 2003 Review



US Army, Technical Manual, TM 55-1945-205-24-1-4, MODULAR CAUSEWAY SYSTEM, (MCS), CAUSEWAY FERRY, (CF), TRANSER CASE 738AN4NL4F, (NSN PENDING), 2003

SCOPE
This manual contains descriptions and maintenance instructions for Unit, Direct Support and General Support Maintenance levels for the causeway ferry transfer case, model number 738AN4NL4F.

Type of Manual: Organizational, Direct Support and General Support Maintenance.

Purpose of Equipment: Transfer power from the engine to the pump-jet.


Wednesday, June 22, 2011

US Army Special Forces, Technical Manual, TM 9-1015-223-12, 90-MM RECOILLESS RIFLE: M67 W/E, (1015-00-657-7534), (EIC: 4G2), 1992

US Army Special Forces, Technical Manual, TM 9-1015-223-12, 90-MM RECOILLESS RIFLE: M67 W/E, (1015-00-657-7534), (EIC: 4G2), 1992 Review



US Army Special Forces, Technical Manual, TM 9-1015-223-12, 90-MM RECOILLESS RIFLE: M67 W/E, (1015-00-657-7534), (EIC: 4G2), 1992

SCOPE.
a. Type of manual. Operator and organizational maintenance.
b. Mode/Number and Equipment Name. 90-mm Recoilless Rifle M67.
c. Purpose of Equipment. Provides antitank and antipersonnel fire to ground troops.

INTRODUCTION
General Information
OPERATING INSTRUCTIONS
Description and Use of Operator’s Controls and
Indicators
Preventive Maintenance Checks and Services
(PMCS)
Operation Under Usual Conditions
Operation Under Unusual Conditions
Operation of Auxiliary Equipment
including all changes,
OPERATOR MAINTENANCE INSTRUCTIONS
Lubrication Instructions
Troubleshooting Procedures
Operator Maintenance Procedures
Maintenance of Auxiliary Equipment
Introduction
Preparation for Firing
Maintenance of Ammunition
ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Repair Parts, Special Tools, TMDE and Support
Equipment
Service Upon Receipt
Organizational Preventive Maintenance Checks and
Services (PMCS)
Organizational Troubleshooting
Organizational Maintence Procedures
REFERENCES
MAINTENANCE ALLOCATION CHART
COMPONENTS OF END ITEM AND BASIC ISSUE
ITEMS LIST
ADDITIONAL AUTHORIZATION LIST
EXPENDABLE/DURABLE SUPPLIES AND
MATERIALS LIST